1. Predrag Živković, Faculty of Mechanical Engineering in Niš, Serbia
2. Sadoon Ayed, Faculty of Mechanical Engineering in Niš, Serbia
3. Mladen Tomić, The School of Higher Technical Professional Education, Niš, Serbia
4. Janja Branković, Faculty of Mechanical Engineering in Niš, Serbia
5. Mirko Dobrnjac, Faculty of Mechanical Engineering,
Republic of Srpska, Bosnia and Herzegovina
Measurements of temperature distribution were performed in a rectangular tank with aspect ratios 4x2x1, using motor oil as a working fluid. The experimental setup was adjusted to be as close to real fuel tanks exposed to solar radiation, as in airplane wings. The measurements were taken at fifteen different positions on the faces of the tank. Probes used are PT100 elements. In order to obtain as uniform temperature as possible, double bottom was used, with water as medium for obtaining the constant surface temperature. The results are compared with those obtained by IR camera.
This paper is concerned by the National Program of Energy Efficiency, project number: TR33036, funded by the Government of Republic of Serbia
Key words :
Thematic field:
Energetics and Thermal Engineering
Date:
27.02.2017.
13th International Conference on Accomplishments in Mechanical and Industrial Engineering
Paper file
(4.50 MB)
