Test bench for non-standard measurement characteristics of reciprocating compressor

1. Dragan Taranović, Faculty of Engineering, University of Kragujevac, Sestre Janjić 6, 34000 Kragujevac, Srbija 2IMW Ins, Serbia
2. Radivoje Pešić, Fakultet inženjerskih nauka Univerziteta u Kragujevcu, Serbia
3. Jovanka Lukic, Fakultet inženjerskih nauka Univerziteta u Kragujevcu, Serbia

A dynamic test of the reciprocating compressor requires non-standard measurement of input parameters (pressure, temperature, flow, humidity), output parameters (pressure, mass of compressed gas) and process parameters (pressure in the cylinder, piston position) of reciprocating compressors. For non-standard testing is necessary to establish a special test bench. Non-standard measurements required automatic adjustment of power unit and actuators parameters in the test bench to enable the change of compressor working point and to control input and output compressor parameters in order to be constant during a measurement time. The paper describes the test bench and some results of non-standard measurement characteristics of reciprocating compressor.

Tematska oblast: Mehanika i konstrukcije

Uvodni rad: Da

Datum: 14.02.2011.

Br. otvaranja: 869

11th International Conference on Accomplishments in Mechanical and Industrial Engineering

Datoteka uz rad  (1.45 MB)


Ostali radovi sa konferencije


Pretraži radove