CHANGES VOLTAGE COMPACTION POLYPROPYLENE FILLED WITH GLASS POWDER

1. Zoran Janjuš, City Administration, Banja Luka, Republic of Srpska, Bosnia and Herzegovina

Abstract: The aim of this paper is not going into the chemical bonding and physical characteristics composites show the changes of mechanical properties of composites produced from scrap polypropylene and waste glass. The purpose is to show the polymeric waste as raw material or otherwise utilizing material obtained partial separation of municipal waste. In the paper was processed ability to use polypropylene recycling with the addition of glass powder, from the change of voltage compaction. Tested are standard test tubes, made of base material - polypropylene and with the addition of 0%, 5%, 10%, 15%, 20%, 25% and 30% glass powder grain size less 0,5mm, through six cycles of treatment. Were measured characteristic size for testing compaction.
The measured values are given the possibility of forming patterns of the change voltage compaction of materials with different content of foreign body, through cycles of processing, which can help in further research and analysis.
Key words: Recycling, polypropylene, voltage compaction.

Tematska oblast: Održavanje tehničkih sistema

Uvodni rad: Da

Datum: 30.12.2010.

Br. otvaranja: 942

11th International Conference on Accomplishments in Mechanical and Industrial Engineering

Datoteka uz rad  (3.36 MB)


Ostali radovi sa konferencije


Pretraži radove