1. Grujić Radoslav,
Republic of Srpska, Bosnia and Herzegovina
2. Danica Savanović, Tehnološki fakultet Univerziteta u Banjoj Luci,
Republic of Srpska, Bosnia and Herzegovina
Intensity of changes during the freezing storage frozen foods, depends on several factors. Changes of foods during freezing and thawing can be rapid determined by scanning calorimetry (DSC). The aim of this study was to test the influence of scanning rate on the thermal properties of previously heat-treated food products (boiled apple), using the differential scanning calorimetry method. By increasing the scanning rate, a significant change (p<0.05) Tcon from -14,20 °C (rate 5 °C/min) to -15.57 °C (rate 15 °C/min) and Tcend (from -17.53 °C to -22.90 °C) were determined, and ΔTc increased from 3.33 °C to 7.33 °C. At the same time, the width of the melting temperature interval (ΔTm) increased from 7.80 °C to 12.87 °C. The glass transition temperature (Tgmid) ranged from -7.15 ° C (rate 5 °C/min) to -6.60 ° C (rate 15 °C/min). Based on the obtained results, it was found that the scanning rate during the DSC determination statistically significant (p<0.05) influenced the measured values of the thermal properties of the tested heat-treated apple samples.
Ključne reči :
Tematska oblast:
SIMPOZIJUM A - Nauka materije, kondenzovane materije i fizika čvrstog stanja
Datum:
30.07.2019.
Contemporary Materials 2019 - Savremeni Materijali
Datoteka uz rad
(280.50 KB)
