https://www.high-endrolex.com/10

eKonferencije.com: Properties of the wrought Al alloy 7075 obtained by electromagnetic casting process

Properties of the wrought Al alloy 7075 obtained by electromagnetic casting process

1. Zvonko Gulisija, Institut za tehnologiju nuklearnih i drugih mineralnih sirovina, Serbia
2. Marija Mihailović, Serbia

The advantages of electromagnetic casting process (EMC) comparing to the conventional continuous casting process of Al alloys are presented here. Besides the better ingot surface obtained as the result of the reduced metal-mould contact pressure, the uniform fine-grained microstructure, and hence the mechanical properties of the alloy can be achieved. Following the correlation microstructure-mechanical properties, the preferred mechanical properties can be assured by the adequate microstructural properties obtaining. The microstructural properties quantification is the object of this investigation. Finally, as the consequence of improved as-cast microstructure, the casting defects are avoided, the material and energy savings are achieved.

Ključne reči :

Tematska oblast: Proizvodne tehnologije i inženjerstvo

Uvodni rad: Da

Datum: 12.04.2011.

Br. otvaranja: 743

11th International Conference on Accomplishments in Mechanical and Industrial Engineering

Datoteka uz rad  (739.50 KB)


Ostali radovi sa konferencije


Pretraži radove

https://www.high-endrolex.com/10