1. Predrag Živković, Faculty of Mechanical Engineering Niš , Serbia
2. Sadoon Ayed, Универзитет у Нишу, Машински факултет, Serbia
3. Mladen Tomić, The School of Higher Technical Professional Education, Niš, Serbia
4. Janja Branković, University of Nis, Faculty of Mechanicla Engineering, Serbia
5. Mirko Dobrnjac, Машински факултет Универзитета у Бањој Луци, Republic of Srpska, Bosnia and Herzegovina
Measurements of temperature distribution were performed in a rectangular tank with aspect ratios 4x2x1, using motor oil as a working fluid. The experimental setup was adjusted to be as close to real fuel tanks exposed to solar radiation, as in airplane wings. The measurements were taken at fifteen different positions on the faces of the tank. Probes used are PT100 elements. In order to obtain as uniform temperature as possible, double bottom was used, with water as medium for obtaining the constant surface temperature. The results are compared with those obtained by IR camera.
This paper is concerned by the National Program of Energy Efficiency, project number: TR33036, funded by the Government of Republic of Serbia
Energetics and Thermal Engineering