https://www.high-endrolex.com/10

eKonferencije.com: INFLUENCE OF CERTAIN PROCESS PARAMETERS ON PHOSPHATE REMOVAL BY ELECTROCOAGULATION

INFLUENCE OF CERTAIN PROCESS PARAMETERS ON PHOSPHATE REMOVAL BY ELECTROCOAGULATION

1. Borislav Malinović, Tehnološki fakultet Univerziteta u Banjoj Luci, Republic of Srpska, Bosnia and Herzegovina
2. Tijana Đuričić, Tehnološki fakultet Univerziteta u Banjoj Luci, Republic of Srpska, Bosnia and Herzegovina
3. Natalija Bjelajac, Tehnološki fakultet Univerziteta u Banjoj Luci, Republic of Srpska, Bosnia and Herzegovina

In this paper was investigated the effect of supporting electrolyte concentration, mixing, cathode material and pulsed current regime on electrocoagulation proces of wastewater containing phosphates. All experiments were performed at an initial pH value 3, initial phosphate concentration 0=50 mg/L (P-PO4) and the current density j=0-2,0 mA/cm2. The concentration of sodium chloride as supporting electrolyte varied in the range of 0-2.0 g / L, the electrolysis duration was 10 minutes, and 30 minutes during the examination of the impact of mixing on phosphate removal efficiency, respectively. As a cathode material, other than iron and aluminum was used and stainless steel.

Ključne reči :

Tematska oblast: SIMPOZIJUM C - Voda

Datum: 24.06.2016.

Contemporary Materials 2016 - Savremeni Materijali

Datoteka uz rad  (65.50 KB)
Datoteka uz rad  (538.50 KB)


Ostali radovi sa konferencije


Pretraži radove

https://www.high-endrolex.com/10