1. Boban Andjelković, Универзитет у Нишу, Машински факултет, Serbia
2. Dragan Milčić, Универзитет у Нишу, Машински факултет, Serbia
3. Biljana Djordjevic, Masinski fakultet, Serbia
4. Miodrag Milčić, Универзитет у Нишу, Машински факултет, Serbia
5. Nataša Jovanović, Универзитет у Нишу, Машински факултет, Serbia
For the determination of SN curves of friction stir welded joints sophisticated measuring systems are required. The parameters that are measured are cumulative numbers change loads, the moments of specimen fractures and frequency of variable load. In order to reduce the duration of the tests, a special design for the simultaneous testing of a large number of specimens was developed. Specimens are arranged in a series of the console loaded with different masses at each end. For the generation of harmonic oscillations of the console, high-frequency electrodynamic machine (shaker) Sentek Dynamics is used. Because the testing tool is a package of 12 samples rather than one sample, it is necessary to detect the moment of fracture of each sample. The use of conventional measuring equipment is extremely expensive. The probability of damage of equipment is large. For these reasons, an inexpensive, simple, reliable, and autonomous measuring system was developed with a large measuring potential based on ARDUINO platform.
Кључне речи :
Тематска област:
Mechanics and Design
Датум:
27.02.2017.
13th International Conference on Accomplishments in Mechanical and Industrial Engineering
Датотека уз рад
(6.33 MB)
