https://www.high-endrolex.com/10

eKonferencije.com: MODELLING AND FINITE ELEMENT ANALYSIS OF ELEVATOR BUCKETS

MODELLING AND FINITE ELEMENT ANALYSIS OF ELEVATOR BUCKETS

1. Nenad Miloradović, Fakultet inženjerskih nauka Univerziteta u Kragujevcu, Serbia
2. Slobodan Garic, Faculty of Engineering, University of Kragujevac, Sestre Janjić 6, 34000 Kragujevac, Srbija 2IMW Ins, Serbia
3. Rodoljub Vujanac, Fakultet inženjerskih nauka Univerziteta u Kragujevcu, Serbia

The bucket elevator with centrifugal discharge designed for transport of grains is analysed in the paper. Operation, main characteristics and major elements of bucket elevator are described in the paper. Essential elements of calculation of the drive mechanism are presented, bucket discharge type is adopted and main elements of transport device are selected. A rubber belt is selected as traction device. Available transport capacity ranged from 15 t/h to 45 t/h, while lifting height was 18 m. Based on initial data and calculations, a spatial 3D model of the elevator is formed. Static finite element analysis (FEA) of the elevator bucket was conducted based on previously formed model. A modified version of the bucket was made in order to show the influence of design change on mass, deformation and the stress states of the elevator buckets. Modelling of the elevator bucket was conducted using 3D Autodesk Inventor software.

Ključne reči :

Tematska oblast: Mechanics and Design

Datum: 20.02.2017.

13th International Conference on Accomplishments in Mechanical and Industrial Engineering

Datoteka uz rad  (4.29 MB)


Ostali radovi sa konferencije


Pretraži radove

https://www.high-endrolex.com/10